L.E.S.I.M.

DING

  • Aumenta dimensione caratteri
  • Dimensione caratteri predefinita
  • Diminuisci dimensione caratteri
Home Ricerca Elenco pubblicazioni
E-mail Stampa PDF
Indice
Pubblicazioni
Anno 1984
Anno 1985
Anno 1986
Anno 1987
Anno 1988
Anno 1989
Anno 1990
Anno 1991
Anno 1992
Anno 1993
Anno 1994
Anno 1995
Anno 1996
Anno 1997
Anno 1998
Anno 1999
Anno 2000
Anno 2001
Anno 2002
Anno 2003
Anno 2004
Anno 2005
Anno 2006
Anno 2007
Anno 2008
Anno 2009
Anno 2010
Tutte le pagine

Elenco pubblicazioni

Qui troverete tutte le pubblicazioni del Team suddivise per anno


Anno 1984

[1]        F.Cennamo, P.Daponte: "Sistema di misura per la verifica di wattmetri e contatori campione". Atti della LXXXV Riunione Annuale AEI, Riva del Garda, 1984, mem.154.

 


 

Anno 1985

[2]       A.Baccigalupi, P.Daponte, M.D'Apuzzo: "Problems arising in small sized instrument voltage transformers". Proc. of 4th Int. Symposium on Modelling, Identification and Control, Grindelwald (Svizzera), 19-22/Feb./1985, pp.352-355.

 


Anno 1986

[3]       G.Cennamo, P.Daponte, M.Savastano: "Retinal biometry by RF signal analysis". Proc. of 11th SIDUO Congress, Capri, 27/Apr.-1/May/1986, pp.95-103.

 

[4]       F.Cennamo, G.Cennamo, P.Daponte: "Ocular tissue characterization by RF signals analysis". Proc. of XXV International Congress of Ophthalmology, Roma, 4-10/May/86, vol.I, pp. 231-237.

 

[5]       P.Daponte, C.Landi: "The universal waveform analyzer as intelligent measurement apparatus". Proc. of 5th Int. IMEKO Symp. on Intelligent Measurement, Jena (DDR), 10-14/June/1986, vol.1, pp.237-240.

 

[6]       P.Daponte, M.Savastano: "Noise problems in ophthalmic echography". Proc. of 1th International IMEKO Symposium on Measurement of Electrical Quantities, Como, 19-21/June/86, pp.39-44.

 

[7]       G.Cennamo, P.Daponte, N.Rosa: "Studio ecografico del cristallino catarattoso". Proc. of 2th International Congress on Cataract, Cefalu', 17-19/Ott./1986, pp.401-406.

 

[8]       G.Cennamo, P.Daponte, M.Savastano: "Biometria della retina, coroide e della sclera tramite analisi del segnale ecografico in RF". Atti del LXVI Congresso della Societa' Oftalmologica Italiana, Roma, 20-23/Nov./1986, pp.236-242.


Anno 1987

[9]       G.Cennamo, P.Daponte, M.Savastano: "Misura dello spessore della retina in vivo". Clinica Oculistica, Anno VIII, No.1, 1987, pp.44-46.

 

[10]     G.Cennamo, P.Daponte: "Studio delle strutture oculari tramite segnali ecografici a RF". Estratto da "L'occhio che invecchia", B.Lumbroso, Editore Verduci, Roma, 1987, pp.231-241.

 

[11]      F.Cennamo, G.Cennamo, P.Daponte: "Tecniche numeriche per l'analisi in tempo reale di segnali ecografici". Clinica Oculistica, Anno VIII, No.1, 1987, pp.26-30.


Anno 1988

[12]      P.Daponte, C.La Mesa: "Expert system for measuring Kerr effect in solutions". Modelling  Simulation & Control, vol.15, No.2, 1988, pp.1-13.

 

[13]      G.Cennamo, P.Daponte: "Analysis of the ocular structures by RF echographic signals". Bollettino della Societa' Italiana di Biologia Sperimentale, vol.LXIV, No.12, 1988, pp.185-211.

 

[14]      F.Cennamo, G.Cennamo, P.Daponte: "Biometry of retina choroid layer". Proc. of XII SIDUO Congress, Iguazu' (Argentina), 28/Aug.- 2/Sept./1988, pp.155-164.

 

[15]      G.Cennamo, N.Rosa, P.Daponte, G.Iaccarino: "Biometry and characterization of the lens". Proc. of XII SIDUO Congress, Iguazu' (Argentina), 28 Aug.-2/Sept./1988, pp.155-164.

 

[16]      G.Betta, P.Daponte: "Elaborazione ottimale di segnali ecografici in presenza di rumore". Atti  della LXXXIX Riunione Annuale AEI, Capri, 1988, mem. 1d3.

 

[17]      P.Daponte, R.S.Olivito, G.Spadea: "An experimental laser technique for the contact problem of beams and plates resting on an elastic half-space". Atti del XVI Convegno dell'Associazione Italiana per l'Analisi delle Sollecitazioni (AIAS), L'Aquila, 20-24/Sett./88, pp.169-180.

 

[18]      P.Daponte, R.S.Olivito, G.Spadea: "Un sistema di misura per l'indagine sperimentale dei problemi di contatto tra solidi elastici". Atti del IX Congresso Nazionale AIMETA, Bari, 4-7/Ott./88, vol.II, pp.513-516.

 

[19]      P.Daponte, R.S.Olivito, G.Spadea: "Experimental techniques in contact problems". Proc. of V DANUBIA-ADRIA Symp. on 'Experimental methods in solid mechanics', Udine, 13-15/Oct./1988.

 


Anno 1989

[20]      P.Daponte, R.S.Olivito: "Indagine sperimentale su modelli strutturali in contatto unilaterale con attrito mediante tecniche ultrasoniche". Atti del XVII Convegno dell'Associazione Italiana per l'Analisi delle Sollecitazioni (AIAS), Ancona, 12-16/Sett./89, pp.465-476.

 

[21]      P.Daponte, M.Savastano: "Efficiency measurements with digital waveform analyzers". Proc. of 3rd Int. IMEKO Symp. on Measurement in Electrical and Electronic Power Systems, Zurigo, 20-22/Sept./89, pp.241-250.

 

[22]      P.Daponte, R.S.Olivito: "Metodi ultrasonici per il rilevamento del danno nel calcestruzzo: analisi nel dominio del tempo e della  frequenza". Atti del Convegno Nazionale in ricordo di Riccardo Baldacci e Michele Capurso, C.N.R., Roma, 25-27/Ott./1989, pp.297-306.

 

[23]      P.Daponte, R.S.Olivito: "Crack detection measurements in concrete". Proc. of the ISMM Int. Conf. on Microcomputer Applications,  Los Angeles (U.S.A.), 14-16/Dec./1989, pp.123-127.

 


Anno 1990

[24]      P.Corsonello, P.Daponte, M.Savastano: "Hysteresis modeling for instrument transformers". Proc. of European Simulation MultiConference 90, Norimberga, 10-13/June/ 1990.

 

[25]      P.Daponte, R.S.Olivito: "Frequency analysis for crack detection in concrete". Proc. of 9th Int. Conference on Experimental Mechanics, Copenhagen, 20-24/Aug./1990, vol.4, pp.1355-1364.

 

[26]      P.Corsonello, P.Daponte: "Simulation of electronic measurement transformers". Proc. of Int.  Conf. on Instrument  Transformers - Current State and Trends of  Development,  Lodz (Poland), 12-14/ Sept./1990, pp.209-214.

 

[27]      P.Daponte, R.S.Olivito, P.Stumpo: "Rilevamento e controllo del danno in materiali strutturali mediante tecniche ultrasoniche". Atti del XVIII Convegno AIAS, Amalfi (SA), 12-15 /Sett./1990, pp.534-542.

 

[28]      P.Daponte, G.Di Massa, A.Testa: "On the use of a special window in power harmonic analysis". Proc. of IV  Int. Conf. on Harmonics in Power Systems, Budapest, 4-6/Oct./1990, pp.179-183.

 

[29]      P.Daponte, L.Di Fraia: "Misura dei parametri di alimentatori elettronici per lampade a scarica  ad alta intensita'". Atti del IV Congresso Int. dell'Associazione Italiana di Illuminazione. Taormina, 24-26/Ott./1990, vol.I, pp.527-537.

 

[30]      P.Daponte, F.Maceri, R.S.Olivito: "Frequency-domain analysis of ultrasonic pulses for the measure of damage growth in structural materials". Proc. of IEEE 1990 Ultrasonics  Symposium, Honolulu (USA), 4-7/Dec./1990, pp.1113-1118.

 

[31]      P.Corsonello, P.Daponte: "Tecniche di simulazione per reti elettriche". Atti della Conferenza Nazionale 1990 della Italian Society for Computer Simulation, Roma, 14/Dic./1990, pp.181-188.

 

[32]      P.Corsonello, P.Daponte, M.Savastano: "A technique to link experimental data to a simulation environment". Atti della Conferenza Nazionale 1990 della Italian Society for Computer Simulation, Roma, 14/Dic./1990, pp.190-194.

 


Anno 1991

[33]      G.Cennamo, G.Cristini, P.Daponte: "Choroidal thickness in primary glaucoma". Ophthalmologica, vol.202, No.2, KARGER, Basel, 1991, pp.81-85.

 

[34]      A. Baccigalupi, P.Daponte: "I processori per l'elaborazione digitale dei segnali nella compensazione dei trasformatori di misura". L'Energia Elettrica, vol.LXVIII, No.3, 1991, pp.119-124.

 

[35]      P.Daponte, L.Di Fraia, G.Savastano: "Accurate measurement of electronic ballast power losses". Journal of Illuminating Eng. Society, vol.20, No.1, winter issue, 1991, pp.64-69.

 

[36]      P.Daponte, A.Falcomata', A.Testa: "A window for harmonic analysis in power systems". Proc. of 10th European Conf. on Circuit Theory & Design, Copenhagen, 2-6/Sept./1991, vol.II, pp.631-638.

 

[37]      F.Cennamo, P.Daponte, M.D'Apuzzo and M.Savastano: "Digitizing signal analyzers calibration". Proc. of 12th IMEKO World Congress, Beijing (Cina), 5-10/Sept./1991, vol.I, pp.148-153.

 

[38]      P.Daponte, R.S.Olivito, P.Stumpo: "Misure ad ultrasuoni in provini di calcestruzzo sottoposti a carichi ciclici". Atti del Convegno dell'Associazione Italiana per l'Analisi delle Sollecitazioni (AIAS), Palermo, 25-28 /Sett./1991, pp.289-299.

 


Anno 1992

[39]      P.Daponte, R.S.Olivito, G.Spadea: "Ultrasonic and laser measurements in structure contact problems". Materials and Structures, RILEM, Paris, vol.25, 1992, pp.42-48.

 

[40]      A.Baccigalupi, P.Daponte, M.D'Apuzzo: "An ADC error model for testing digitizing signal analyzers". Proc. of 5th Int. IMEKO Symp. on Electrical Measuring Instruments for Low and Medium Frequencies, Vienna, 8-10/April/1992, pp.167-174.

 

[41]      P.Corsonello, P.Daponte, F.De Grazia, D.Grimaldi: "On two coupled inductors stray capacitance evaluation for CAD-oriented modeling". Proc. of 35th IEEE Midwest Symposium on Circuits and Systems, Washington, 9-12/August/1992, pp.1252-1255.

 

[42]      F.Cennamo, P.Daponte, M.Savastano: "Dynamic testing and diagnostics of digitizing signal analyzers". IEEE Trans. on Instrum. and Meas., vol.41, No.6, December 1992, pp.840-844.

 

[43]      P.Daponte, L.Nigro, F.Tisato: "Object-oriented design of measurement systems". IEEE Trans. on Instrum. and Meas., vol.41, No.6, December 1992, pp.874-880.

 


Anno 1993

[44]      P.Daponte, D.Grimaldi, M.Savastano: "Simulation tools for electrical networks: comparison among the existing methodologies and a new proposal". Proc. of Eurosim'92 Simulation Congress, F.Maceri and G.Iazeolla Eds., North-Holland 1993, pp. 441-449.

 

[45]      P.Daponte, A.Testa, S.Vazzana: "Chirp-Z and Segmented Chirp-Z transform in DADiSP environment". Report 1-93, Dip. di Ing. Elettrica, Universita' di Napoli "Federico II", 12/Feb./93.

 

[46]      P.Daponte, L.Nigro, F.Tisato: "Object-oriented architecture of measurement systems: the user-interface". Proc. of IEEE Instrum. and Meas. Technical Conf., Irvine (USA), 18-20/May/1993, pp.758-763.

 

[47]      G.Betta, P.Daponte: "Detection of echoes in noisy environments for multilayer structure characterization". IEEE Trans. on Instrum. and Meas., vol.42, No.4, August 1993, pp.834-841.

 

[48]      F.Cennamo, P.Daponte, D.Grimaldi, E.Loizzo: "An improved neural based A/D converter", Proc. of 36th IEEE Midwest Symposium on Circuits and Systems, Detroit, 16-18/August/1993, pp.430-433.

 

[49]      A.Brandolini, F.Cennamo, P.Daponte, A.Gandelli: "Metodologie di prova e misure sui convertitori analogico-numerici", Atti del Congresso Annuale del Gruppo Misure Elettriche ed Elettroniche, Brescia, 16-18/Sett./1993, pp.54-63.

 

[50]      P.Daponte, A.Molinaro: "Significato e valutazione del numero di bit effettivi". Centro Editoriale e Librario dell'Universita' degli Studi della Calabria, Rende (CS), Sett. 1993, pp.1-65.

 


Anno 1994

[51]      A.Baccigalupi, P.Daponte, M.D'Apuzzo: "An improved error model of data acquisition systems". IEEE Trans. on Instrum. and Meas., vol. 43, No.2, April 1994, pp.220-225.

 

[52]      P.Daponte, A.Falcomata', A.Testa: "A multiple deep attenuation frequency window for harmonic analysis in power systems". IEEE Trans. on Power Delivery, vol.9, No.2, April 1994, pp.863-871.

 

[53]      P.Daponte, L.Nigro, F.Tisato: "Virtual laboratory: an object-oriented framework". Proc. of IEEE Instrum. and Meas. Technical Conf., Hamamatsu (Japan), 10-12/May/1994, vol.S, pp.11-16.

 

[54]      F.Cennamo, P.Daponte, D.Grimaldi, E.Loizzo: "Testing the performances of neural A/D converter", Proc. of IEEE Instrum. and Meas. Technical Conf., Hamamatsu (Japan), 10-12/May/1994, vol.2, pp.899-902.

 

[55]      P.Daponte, D.Grimaldi, A.Molinaro, Ya.D.Sergeyev: "An algorithm for a reliable search of switching times". Proc. of IEEE Workshop on Advanced Mathematical Methods in Electrical and Electronic Measurements, Villa Olmo, Como, 6-8/July/1994, pp.229-240.

 

[56]      P.Arpaia, F.Cennamo, P.Daponte, M.D'Apuzzo: "Diagnosis of analog to digital converters by means of Walsh transform". Proc. of 13th IMEKO World Congress, Torino, 5-9/Sept./1994, pp.398-403.

 

[57]      F.Cennamo, P.Daponte, D.Grimaldi, E.Loizzo: "Neural networks for A/D converters". Proc. of 13th IMEKO World Congress, Torino, 5-9/Sept./1994, pp.2313-2318.

 

[58]      F.Avallone, P.Daponte, D.Grimaldi: "Performance analysis on electronically compensated current transformers affected by conducted and radiated interferences". Proc. of Int. Symp. on Electromagnetic Compatibility, Rome, 13-16/Sept./ 1994, vol.II, pp.782-787.

 

[59]      A.Baccigalupi, P.Daponte, D.Grimaldi: "On circuit theory approach to evaluate the stray capacitances of two coupled inductors". IEEE Trans. on Instrum. and Meas., vol.43, No.5, October 1994, pp.774-776.

 

[60]      P.Daponte, E.Loizzo, A.Molinaro: "Convertitori analogico/numerici". Centro Editoriale e Librario dell'Universita' degli Studi della Calabria, Rende (CS), Ott. 1994, pp.132.

 

[61]      P.Daponte, D.Grimaldi, E.Loizzo, L.Michaeli, L.Caputo: "A new approach of analogue neural networks design for analogue-digital converter". Proc. of Electronic Devices and Systems Conference, Brno, Czech Republic, 22-23/Nov./1994, pp.84-87.

 


Anno 1995

[62]      P.Daponte, L.Nigro, F.Tisato: "Integrating the user interface in an object-oriented measurement system". Measurement, vol.15, No.2, April 1995, pp.91-101.

 

[63]      P.Daponte, D.Grimaldi, L.Michaeli: "Gray code ADC based on an analog neural circuit". Radioengineering, vol.4, No.1, April 1995, pp.7-12.

 

[64]      P.Arpaia, F.Cennamo, P.Daponte, M.D'Apuzzo: "Dynamic characterization of scan conversion-based transient digitizers". IEEE Trans. on Instrum. and Meas., vol.44, No.3, June 1995, pp.643-646.

 

[65]      P.Daponte: "Electronically compensated current transformer modelling". Measurement, vol.15, No.4, July 1995, pp.213-222.

 

[66]      P.Daponte, C.Liguori, A.Pietrosanto: "Real time harmonic analysis by multiple deep dip windows". Proc. of Int. IMEKO Symp. on Modern Electrical and Magnetic Measurements, Prague, 13-14/Sept./1995, vol.3, pp.609-613.

 

[67]      P.Daponte, C.De Capua, A.Molinaro: "A non iterative fast frequency and phase estimator for sinewaves". Proc. of Int. IMEKO Symp. on Modern Electrical and Magnetic Measurements, Prague, 13-14/Sept./1995, vol.3, pp.645-649.

 

[68]      A.Baccigalupi, P.Daponte, D.Grimaldi: "An N-winding transformer model including stray capacitances". Proc. of Int. IMEKO Symp. on Modern Electrical and Magnetic Measurements, Prague, 13-14/Sept./1995, vol.3, pp.650-654.

 

[69]      P.Daponte, L.Angrisani: "Tecniche digitali e strumenti per la misura di spessori sottili". Atti del Congresso Annuale del Gruppo Misure Elettriche ed Elettroniche, Bologna, 21-23/Sett./1995, pp.206-212.

[70]      P.Daponte, D.Grimaldi, A.Molinaro, Ya.D.Sergeyev: "An algorithm for finding zero crossing of time signals with Lipschitzean derivatives". Measurement, vol.16, No.1, Sept. 1995, pp.37-49.

 

[71]      F.Cennamo, P.Daponte, D.Grimaldi, E.Loizzo: "A new neural A/D converter architecture". Measurement, vol.16, No.3, November 1995, pp.177-186.

 

[72]      P.Daponte, F.Maceri, R.S.Olivito: "Ultrasonic signal-processing techniques for the measurement of damage growth in structural materials". IEEE Trans. on Instrum. and Meas., vol.44, No.6, Dec. 1995, pp.1003-1008.

 


Anno 1996

[73]      P.Daponte, G.Fazio, A.Molinaro: "Detection of echoes using time-frequency analysis techniques". IEEE Trans. on Instrum. and Meas., vol.45, No.1, Feb. 1996, pp.30-40.

 

[74]      P.Arpaia, F.Cennamo, P.Daponte, M.D'Apuzzo: "A behavioural model for scan converter-based transient digitizers". Measurement, vol.17, No.2, Feb. 1996, pp.103-114.

 

[75]      F.Avallone, P.Daponte, D.Grimaldi: "Current transducer behaviour in noisy environment". Measurement, vol.17, No.3, March 1996, pp.189-200.

 

[76]      P.Arpaia, F.Cennamo, P.Daponte, M.D'Apuzzo: "Performance enhancement of scan converter-based transient digitizers by digital image processing". IEEE Trans. on Instrum. and Meas., vol.45, No.2, April 1996, pp.422-425.

 

[77]      A.Bernieri, P.Daponte, D.Grimaldi: "ADC neural modeling". IEEE Trans. on Instrum. and Meas., vol.45, No.2, April 1996, pp.627-633.

 

[78]      P.Daponte, D.Grimaldi, L.Michaeli: "A full neural Gray-code-based ADC". IEEE Trans. on Instrum. and Meas., vol.45, No.2, April 1996, pp.634-639.

 

[79]      P.Daponte, D.Grimaldi, A.Piccolo, U.Villacci: "A neural diagnostic system for the monitoring of transformer heating". Measurement, vol.18, No.1, May 1996, pp.35-46.

 

[80]      P.Arpaia, F.Cennamo, P.Daponte: "An algorithmic model for correcting scan converter distortion". Proc. of 1st IMEKO Workshop on ADC Modelling, Smolenice Castle, Slovacchia, 7-9/May/1996, Daponte and Michaeli Ed., pp.94-99.

 

[81]      P.Daponte, L.Michaeli: Proc. of 1st IMEKO Workshop on ADC Modelling, Smolenice Castle, Slovacchia, 7-9/May/1996, CUES Publisher.

 

[82]      P.Daponte, D.Grimaldi, L.Michaeli: "A design method for signal processing in measurement instruments by neural networks". Proc. of IEEE Instrum. and Meas. Technical Conf., Bruxelles, 4-6/June/1996, pp.1004-1009.

 

[83]      P.Daponte, D.Menniti, A.Testa: "Segmented Chirp Z-Transform and multiple deep windows for electrical power system harmonic analysis". Measurement, vol.18, No.4, August 1996, pp.215-224.

 

[84]      P.Daponte, D.Grimaldi, A.Molinaro, Ya. D. Sergeyev: "Fast detection of the first zero-crossing in a measurement signal set". Measurement, vol.19, No.1, Sept. 1996, pp.29-39.

[85]      P.Arpaia, A.Baccigalupi, F.Cennamo, P.Daponte: "A distributed measurement laboratory on geographic network". Proc. of IMEKO 8-th Symp. on 'New Measurement and Calibration Methods of Electrical Quantities and Instruments', Budapest, 16-17/Sept./1996, pp.294-297.

 

[86]      L.Angrisani, P.Daponte, M.D'Apuzzo, A.Testa: "A new wavelet transform based procedure for electrical power quality analysis". Proc. of IEEE Int. Conf. on Harmonics and Quality of Power ICHQP'96, Las Vegas, 16-18/Oct./1996, pp.608-614.

 

[87]      P.Daponte, L.Michaeli: "Introduction to Selected Papers on ADC Modelling". Measurement, vol.19, No.3-4, 1996, pp.129-130.

 

[88]      P.Arpaia, F.Cennamo, P.Daponte, M.Savastano: "A distributed laboratory based on object-oriented measurement systems". Measurement, vol.19, No.3-4, 1996, pp.207-215.

 

[89]      P.Arpaia, F.Cennamo, P.Daponte, M.Savastano: "Modelling and remote measurements on scan converters". Proc. of Italian Society for Computer Simulation, Roma, 18-19/Dec./1996, pp.189-196.

 


Anno 1997

[90]      P.Arpaia, A.Baccigalupi, P.Daponte: "A nonlinearity test method for scan conversion-based transient digitizers". Measurement, vol.20, No.1, 1997, pp.1-11.

 

[91]      L.Angrisani, P.Daponte, C.Liguori, A.Pietrosanto: "An automatic measurement system for the characterization of automotive gaskets". Proc. of IEEE IMTC/97, Ottawa, Canada, 19-21/May/1997, vol.1, pp.434-439.

 

[92]      L.Angrisani, P.Daponte, M.D'Apuzzo, A.Pietrosanto: "A VXI signal analyzer based on the wavelet transform". Proc. of IEEE IMTC/97, Ottawa, Canada, 19-21/May/1997, vol.1, pp.440-445.

 

[93]      P.Arpaia, A.Baccigalupi, F.Cennamo, P.Daponte: "Ethernet application perspectives for distributed measurement systems". Proc. of XIV IMEKO World Congress, Tampere, Finland, 1-6/June/1997, vol. IVA, pp.13-18.

 

[94]      L.Angrisani, P.Daponte, M.D'Apuzzo: "Enhanced echo detection for thin thickness measurements by means of the Continuous Wavelet Transform". Proc. of XIV IMEKO World Congress, Tampere, Finland, 1-6/June/1997, vol. IVB, pp.137-142.

 

[95]      P.Daponte, S.Sangiovanni, E.Zappitelli: "A new method for non-periodic signal acquisition with on-line data compression". Proc. of 2nd IMEKO Workshop on ADC Modelling and Testing, Tampere, Finland, 1-2/June/1997, pp.269-275.

 

[96]      P.Arpaia, P.Daponte, L.Michaeli: "A dynamic error model for SAR A/D converters". Proc. of 2nd IMEKO Workshop on ADC Modelling and Testing, Tampere, Finland, 1-2/June/1997, pp.291-296.

 

[97]      P.Daponte, J.Halttunen, L.Michaeli: Proc. of 2nd IMEKO Workshop on ADC Modelling and Testing, Tampere, Finland, 1-2/June/1997.

 

[98]      P.Daponte, D.Grimaldi, A.Molinaro: "An efficient method for evaluating the parameters of the hysteresis loop model of magnetic materials". Proc. of IX IMEKO TC-4 Symposium, Glasgow, 8-9/Sept./1997.

 

[99]      L.Angrisani, P.Daponte: "Thin thickness measurements by means of a wavelet transform-based method". Measurement, vol.20, No.4, Oct. 1997, pp.227-242.

 

[100]    A.Bernieri, P.Daponte, D.Grimaldi: "Accurate neural model identification of measurement devices". Measurement, vol.20, No.4, Oct. 1997, pp.251-257.

 

[101]    P.Arpaia, A.Baccigalupi, F.Cennamo, P.Daponte: "A remote measurement laboratory for educational experiments". Measurement, vol.21, No.4, 1997, pp.157-169.

 


Anno 1998

[102]    L.Angrisani, P.Daponte, C.Dias, A.Valle: "Advanced processing techniques of high-voltage impulse test signals". IEEE Trans. on Instrum. & Meas., vol.47. No.2, April 1998, pp.439-445.

 

[103]    P.Daponte, D.Grimaldi: "Artificial neural networks in measurements". Measurement, vol.23, 1998, pp.93-115.

П.Даронте, Д. Гримальди: 'Искусственные нейронные сети в измерениях'. Приборы и системы управления (Instruments and Control Systems), 1999. №3. С. 48-64.

 

[104]    L.Angrisani, P.Daponte: "A proposal for the automatic evaluation of the mean curve required by the ANSI/IEEE STD 4-1978". IEEE Trans. on Instrumentation and Measurement, vol.47, No.5, October 1998, pp.1180-1186.

 

[105]    L.Angrisani, P.Daponte, M.D'Apuzzo: "A virtual digital signal processing instrument for measuring superimposed power line disturbances". Measurement, vol.24, No.1, 1998, pp.9-19.

 

[106]    P.Daponte, D.Grimaldi, L.Michaeli: "Design method of analog neural networks for pre-processing in measurement sensors". Measurement, vol.24, No.2, 1998, pp.109-118.

 

[107]    P.Arpaia, F.Cennamo, P.Daponte: "Calibration and error compensation of analog to digital scan converters". Computer Standard and Interfaces, vol.19, 1998, pp.119-128.

 

[108]    P.Arpaia, P.Daponte, L.Michaeli: "Analytical a - priori approach to phase-plane modeling of SAR A/D converters". IEEE Trans. on Instrum. and Measurement, vol.47, No.4, August 1998, pp.849-857.

 

[109]    P.Daponte, S.Sangiovanni, E.Zappitelli: "FPGA-based apparatus for acquisition and real-time compression of non-periodic signals ". Proc. of 10th IMEKO TC4 Int. Symp. on Development in Digital Measuring Instrumentation, (Eds. P.Daponte, M.D'Apuzzo, A.Langella), Naples, Italy, 17-18/Sept./1998, pp.953-958.

 

[110]    P.Daponte, M.D'Apuzzo, A.Langella: Proceedings of 10th IMEKO TC4 Int. Symp. on Development in Digital Measuring Instrumentation, and 3rd Workshop on ADC Modelling and Testing, Naples, Italy, 17-18/Sept./1998, CUEN Publisher.

 

[111]    L.Angrisani, P.Daponte, M.D'Apuzzo, A.Testa: "A measurement method based on the wavelet transform for power quality analysis" IEEE Trans. on Power Delivery, vol.13, No.4, Oct. 1998, pp.990-998.

 

[112]    F.Cennamo, P.Daponte, L.Michaeli: "Introduction to special issue on ADC Modelling and Testing". Computer Standard and Interfaces, vol.19, 1998, pp.169-171.


Anno 1999

[113]    L.Angrisani, P.Daponte, M.D'Apuzzo: "A method for the automatic detection and measurement of transients. Part I: The measurement method", Measurement, vol.25, No.1, 1999, pp.19-30.

L.Angrisani, P.Daponte, M.D'Apuzzo: "A method for the automatic detection and measurement of transients. Part II: Applications", Measurement, vol.25, No.1, 1999, pp.31-40.

 

[114]    P.Arpaia, P.Daponte, D.Grimaldi, L.Michaeli: "Systematic error correction for experimentally modelled sensor by using ANNs". Proc. of IEEE IMTC/99, Venice, Italy, 24-26/May/1999, vol.3, pp.1635-1640.

 

[115]    L.Angrisani, P.Daponte, S.Sangiovanni: "Solutions for improving the performance of data acquisition systems". Proc. of IMEKO World Congress, Osaka, Japan, 13-18/June/1999, vol.IV, pp.55-62.

 

[116]    L.Angrisani, P.Daponte, C.Liguori, A.Pietrosanto: "An image-based measurement system for the characterization of automotive gaskets". Measurement, vol.25, No.3, 1999, pp.169-181.

 

[117]    P.Arpaia, P.Daponte, L.Michaeli: "A dynamic error model for integrating analog-to-digital converters", Measurement, vol.25, No.4, June 1999, pp.255-264.

 

[118]    P.Arpaia, F.Cennamo, P.Daponte, "Metrological characterisation of analog-to-digital converters - a state of the art", Proc. of 3rd IEE Int. Conf. on "Advanced A/D and D/A Conversion Techniques and their Applications", IEE ADDA-99, Glasgow (UK), 26-28/July/1999, pp.134-144.

 

[119]    P.Daponte, D.Grimaldi, L.Michaeli: "Analogue neural network design for the processing of measurement signals". Measurement, vol.26, No.1, 1999, pp.1-17.

 

[120]    L.Angrisani, P.Daponte, M.D'Apuzzo, A.Pietrosanto: "A VXI power quality analyser implementing a wavelet transform based measurement procedure". Measurement, vol.26, 1999, pp.91-102.

 

[121]    L.Angrisani, P.Daponte, C.Dias, A.Valle: "A wavelet based approach for measurements on high voltage impulses". Proc. of Eleventh International Symposium on High Voltage Engineering, London, 23-27 August 1999, vol. 1, pp.1.205.P4-1.208-P4.

 

[122]    P.Arpaia, F.Cennamo, P.Daponte: "An error correction technique for scan conversion-based transient digitizers". IEEE Transactions on Instrumentation and Measurement, vol.48, n.4, August, 1999, pp.785-792.

 

[123]    P.Arpaia, P.Daponte, I.Kale: "Metrological characterization of high-performance D-S modulator for instrumentation". Proc. of 4th IMEKO International Workshop on ADC Modelling and Testing, Bordeaux (F), 9-10/Sept./1999, pp.128-131.

 

[124]    P.Arpaia, P.Daponte, L.Michaeli, L.Iannelli: "A method for the optimal compensation of dynamic nonlinearity in SAR ADCs", Proc. of 4th "IMEKO International Workshop on ADC Modelling and Testing", Bordeaux (F), 9-10/Sept./1999, pp.159-165.

 

[125]    P.Arpaia, P.Daponte, Y.D.Sergeyev, "A-priori statistical parameter design of ADCs by a global optimisation algorithm with local tuning", Proc. of 4th "IMEKO International Workshop on ADC Modelling and Testing", Bordeaux (F), 9-10/Sept./1999, pp.236-244.

 

[126]    L.Bechou, L.Angrisani, Y.Ousten, D.Dallet, P.Daponte, Y.Danto: "Localization of defects in die-attach assembly by continuous wavelet transform using scanning acoustic microscopy", Microelectronics Reliability, Pergamon, vol.39, 1999, pp.1095-1101.

 

[127]    A.Aiello, P.Daponte, D.Grimaldi, L.Michaeli: "Artificial neural network for DTMF decoders", Proc. of Int. Conf. on Neural Networks and Artificial Intelligence, Brest, Belarus, October 12-15, 1999, pp.110-116.

 

[128]    P.Arpaia, P.Daponte, L.Michaeli: "Influence of the architecture on ADC error modeling". IEEE Transactions on Instrumentation and Measurement, vol.48, No.5, October, 1999, pp.956-966.

 

[129]    P.Daponte, D.Grimaldi, A.Molinaro, Ya.D.Sergeyev: "Two methods for solving optimization problems arising in electronic measurements and electrical engineering". SIAM Journal Opt., vol.10, No.1, 1999, pp.1-21.

 


Anno 2000

[130]    P.Daponte, D.Grimaldi, L.Michaeli: "Neural network and DSP based decoder for DTMF signals". IEE Proceedings - Science Measurement and Technology, vol.147, No.1, January 2000, pp.34-40.

 

[131]    P.Arpaia, P.Daponte, M.Marinov: "Measurement systems distributed on geographical networks for educational purposes". Proc. of 2000 IEEE International Workshop on Virtual and Intelligent Measurement Systems, Annapolis, MD, USA, April 29-30, 2000, pp.62-68.

 

[132]    P.Daponte, S.Sangiovanni, E.Zappitelli: "Data acquisition systems for non periodic signal with real-time data compression". Measurement, vol.27, No.3, 2000, pp.145-158.

 

[133]    L.Angrisani, P.Daponte, G.Lupo', C.Petrarca, M.Vitelli: "Analysis of ultrawide-band detected partial discharges by means of a multiresolution digital signal-processing method", Measurement, vol.27, No.3, 2000, pp.207-221.

 

[134]    C.Fernandes, P.Daponte,  G.Marinova, M.Marinov, V.Gouliashki: "Geographically  distributed teaching laboratory for microelectronic design and testing" Proc. of the 3rd European Workshop on Microelectronics Education, Chateau l'Arc-Fuveau (France), May 18-19, 2000, pp.131-134.

 

[135]    P.Daponte, L.Michaeli: "Introduction to special issue on ADC modelling and testing-3rd workshop  on ADC modelling and testing". Measurement, vol.28, No.2, 2000, pp.61-64.

 

[136]    L.Angrisani, P.Daponte, M.D'Apuzzo: "The detection of echoes from multilayer structures using the Wavelet Transform". IEEE Trans. on Instrum. and Measurement. vol.49, n.4, August, 2000, pp.727-731.

 

[137]    P.Daponte, G.Mercurio, S.Rapuano: "Misure per monitorare la qualità nelle reti di telecomunicazioni". Memoria ad invito al XVII Congresso Nazionale GMEE, Atti del XVII Congresso GMEE, Perugia, 14-16 Settembre 2000, pp.260-269.

 

[138]    A.Aiello, D.Grimaldi, P.Daponte: "A non-intrusive estimation of the carrier frequency in GMSK signals". Proc. of AUTOTESTCON 2000, Anaheim, California, USA, Sept. 18-21, 2000, pp.621-625.

 

[139]    P.Arpaia, P.Daponte, F. Maccaro, S. Rapuano: "Characterisation and modeling of the ADC Jitter". Proc. of 5th IMEKO TC-4 Workshop on ADC Modelling and Testing, Vienna, Sept. 26-28, 2000, pp.27-32.

 

[140]    P.Arpaia, P.Daponte, L.Michaeli, J.Saliga: "Reduction of systematic ADC errors by oversampling". Proc. of 5th IMEKO TC-4 Workshop on ADC Modelling and Testing, Vienna, Sept. 26-28, 2000, pp.33-38.

 

[141]    P.Daponte, L.Michaeli, M.N.Durakbasa, A.Afjehi-Sadat: Proc. of 5th IMEKO TC-4 Workshop on ADC Modelling and Testing, Vienna, Sept. 26-28, 2000.

 

[142]    P.Arpaia, A.Baccigalupi, F.Cennamo, P.Daponte: "A measurement laboratory on geographic network for remote test experiments". IEEE Transactions on Instrumentation and Measurement, vol.49, n.5, October, 2000, pp.992-997.

 

[143]    L.Angrisani, P.Daponte, M.D'Apuzzo: "A measurement method based on time-frequency representations for the qualification of GSM equipment". IEEE Transactions on Instrumentation and Measurement, vol.49, n.5, October, 2000, pp.1050-1056.

 


Anno 2001

[144]    A.Aiello, P.Daponte, D.Grimaldi: "Neural approach to voiced-unvoiced-silence analysis for quality measurements in telecommunication systems", Proc. of Intelligent Quality Management and Metrology Symposium, Dubai, March 17-21, 2001, pp.892-896.

 

[145]    P.Daponte, et al., IEEE Std 1241-2000, "IEEE standard for terminology and test methods for analog-to-digital converters", 13 June 2001.

 

[146]    P.Arpaia, A. M. da Cruz Serra, P.Daponte, C.Libano Monteiro: "A critical note to IEEE 1057-94 Standard on hysteretic ADC dynamic testing". IEEE Transactions on Instrumentation and Measurement, vol.50, No.4, August 2001, pp.941-948.

 

[147]    G.C.Cardarilli, P.Daponte, A.Del Re, R.Lojacono, A.Nannarelli, S.Rapuano, M.Re: "UMTS signal analyser based on a TFR and a FPGA architecture". Proc. of Wireless Personal Multimedia Communication 2001, Aalborg, Danemark, Sept. 9-12, 2001, pp.301-305 (P 1B.2).

 

[148]    P.Daponte, R.Holcer, L.Horniak, L.Michaeli: "Using the interpolations method for noise shaping A/D converters". Proc. of 6th Workshop on ADC Modelling and Testing, Lisboa, Sept. 13-14, 2001, pp.134-137.

 

[149]    L.Angrisani, P.Daponte, M.D'Apuzzo: "Wavelet network-based detection and classification of transients". IEEE Trans. on Instrum. and Meas., vol.50, No.5, October 2001, pp.1425-1435.

 

[150]    P.Daponte, G.Mercurio, S.Rapuano: "A wavelet networks-based method for the digital telecommunication system monitoring", IEEE Trans. on Instrum. and Meas., vol.50, No.6, December 2001, pp.1773-1780.

[151] L. De Vito, F. Lauro, S. Rapuano : "Un metodo per la classificazione e caratterizzazione metrologica automatica delle modulazioni digitali". atti del congresso dell’Italian Society for Computer Simulation (ISCS), Napoli, Dic. 2001, pp. 14-24.

 


Anno 2002

[152]    D.Dallet, P.Daponte: "Introduction to special issue on ADC modelling and testing-4th Workshop  on ADC modelling and testing". Measurement, vol.31, No.1, January 2002, pp.1-2.

 

[153]    P.Arpaia, P.Daponte, D.Grimaldi, L.Michaeli: "ANN-based error reduction for experimentally modeled sensors". IEEE Trans. on Instrum. and Meas., vol.51, No.1, February 2002, pp.23-30.

 

[154]    L.Angrisani, L.Bechou, D.Dallet, P.Daponte, Y.Ousten: "Detection and location of defects in electronic devices by means of scanning ultrasonic microscopy and the wavelet transform". Measurement, vol.31, No.2, March 2002, pp.77-91.

 

[155]    P.Daponte: "Introduction to Special Issue on DAC Modelling and Testing". Measurement, vol.31, No.3, April 2002.

 

[156]    P. Daponte, G. Mercurio, S. Rapuano, G. Truglia: "An Image Processing Based Method for Stress Classification in Digital Telecommunication Networks", IEEE Instrum. and Meas. Technology Conference  Anchorage, AK, USA, 21-23 May 2002

[157]    D.Dallet, P.Daponte, E.Mancini, S.Rapuano: "Modelling and characterisation of pipelined ADCs". Proc. of IEEE IMTC-2002, Anchorage, USA, 21-23 May 2002, pp. 207-211.

[158]    R.Kochan, A.Sachenko, P.Daponte, V.Sobolev, and V.Kochan: "Design of embedded metrology subsystem for intelligent sensing instrumentation structure". Proc. of IEEE IMTC-2002, Anchorage, USA, May, 2002, pp.1171-1176.

 

[159]    P.Daponte, L.Michaeli: "Introduction to Special Issue on ADC modelling and testing: 5th Workshop  on ADC Modelling and Testing". Measurement, Elsevier Pubs., vol.31, No.4, June 2002, pp.219-221.

 

[160]    F.C.Alegria, P.Arpaia, P.Daponte, A. Cruz Serra: "An ADC histogram test based on small-amplitude waves", Measurement, Elsevier Pubs., vol.31, No.4, June 2002, pp.271-279.

 

[161]    P.Daponte, R.Holcer, L.Horniak, L.Michaeli, S.Rapuano: "Using an interpolation method for  noise shaping in A/D converters". 4th IEE ADDA-7th IMEKO TC-4 Wokshop on Modelling and Testing, Prague, Czech Rep., June, 2002, pp. 147-150.

 

[162]   V.Sobolev, A.Sachenko, P.Daponte, O.Aumala: "Metrological automatic support in intelligent measurement systems", Computer Standards & Interfaces, Elsevier Pubs, vol.24, No.2, June 2002, pp.123-131.

B.Coбoлев, A.Caчeнкo, П.Даронте, O.Aумала: 'METPOЛOГИЧECKOE ABTOCOПPOBOЖДEHИE B ИHTEЛЛEKTУAЛЬHЬІX ИЗMEPИTEЛЬHЬІX CИCTEMAX'. Дamчuкu CucmeмЬІ (Sensors & Systems), 2002, №7, С.66-71.

 

[163]    F.C.Alegria, P.Arpaia, A.M. da Cruz Serra, P.Daponte: "Performance analysis of an ADC histogram test using small triangular waves". IEEE Trans. on Instrum. and Meas., vol.51, No.4, August 2002, pp.723-729.

 

[164]    A. Aiello, P. Daponte, L. De Vito, D. Grimaldi, S.Rapuano, G. Truglia: "Un metodo per la classificazione delle modulazioni digitali". Memoria ad invito al XIX Congresso Nazionale GMEE, Atti del XIX Congresso Nazionale GMEE, Parma, 9-11 settembre 2002, pp. 269-277.

 

[165]    S.Statev, G.Marinova, P.Daponte, C.Fernandes: "Comparaison entre les realisations parallele et serie du bloc de propriete intellectuelle de la transformation de Fourier rapide". Proc. of Int. Conf. on Basic Technologies for E-Business, Albena, Bulgaria, Sept. 15-18, 2002, pp.323-330.

 

[166]    P. Arpaia, L. De Vito, S. Rapuano, G. Truglia: "A Measurement Instrument For Fault Diagnosis In Qam-Based Telecommunications", 12th IMEKO TC4 International Symposium   Electrical Measurements and Instrumentation, Zagreb, Croatia,  Sept. 25-27 2002

 

[167]    G.Canfora, P.Daponte, S.Rapuano: "Remotely accessible laboratory for electronic measurement  teaching". Proc. of 12th IMEKO TC-4 Int. Symp. on Electrical Measurements and Instrumentation, Zagreb, Croatia, Sept. 25-27, 2002, pp. 526-531.

 

[168] L. De Vito, S. Rapuano, G. Truglia: "Characterization of an automatic digital modulation classifier". atti dell’International Conference Basic Technologies for e-business, Albena, Bulgaria, Sett. 2002, pp. 45-50.

 

[169]    P.Daponte, D.Grimaldi, M.Marinov: "Real-time measurement and control of an industrial system over a standard network: Implementation of a prototype for educational purposes". IEEE Trans. on Instrum. and Meas., vol.51, No.5, October 2002, pp.962-969.

 

[170]    E.Cianca, M.Angelaccio, M.Luglio, M.Ruggieri, P.Daponte, R.Lojacono, R.Prasad: "Efficient integration of IP-based terrestrial and satellite systems: ARQ techniques and inter-segment handover", Int. Journal on Wireless Personal Communications, Kluwer Academic Publishers, 23(1), Oct 2002, pp. 77-92.

 

[171]    P.Daponte, A.C.Serra: "Introduction to Special Issue on ADC modelling and testing: 6th Workshop  on ADC Modelling and Testing". Measurement, Elsevier Pubs., vol.32, No.4, December 2002, pp.229-230.

 


Anno 2003

[170]    L.Angrisani, P.Daponte, C.Dias: "Performance assessment according to IEC 1083-2 standard of a Wavelet Packet transform based method for measuring the parameters of the high voltage impulses". Measurement, Elsevier Pubs., vol.33, No.1, Jan. 2003, pp.95-108.

 

[171]    L.Bechou, D.Dallet, Y.Danto, P.Daponte, Y.Ousten, S.Rapuano: "An improved method for automatic detection and location of defects in electronic components using scanning ultrasonic microscopy". IEEE Trans. on Instrum. and Meas., vol.52, No.1, Feb. 2003, pp.135-142.

 

[172]    P. Arpaia, P.Daponte, S.Rapuano: "Characterisation of digitizer timebase jitter by means of the Allan variance". Computer Standards and Interfaces, vol.25, No.1, March 2003, pp.15-22.

 

[173]    R.Lojacono, M.Re, M.Caciotta, F.Leccese, D.Petri, A.Moschitta, C.Gennarelli, G.Riccio, P.Daponte, S.Rapuano, D.Grimaldi, S.Graziani, S.Sangiovanni: "Perspectives of QoS management based on QoAS for 3G communication systems". Special Issue on Broadband Mobile Terrestrial-Satellite Integrated Systems, Int. Journal on Wireless Personal Communications, vol.24, No.2, pp.249-273, 2003.

 

[174]    P.Daponte, S.Rapuano, G.Truglia: "An improved image processing-based method for disturbance classification in telecommunication networks". Proc. of IMTC 2003- Instrumentation and Measurement Technology Conference, Vail, CO, USA, 20-22 May 2003, pp.321-326.

 

[175]    P.Daponte, D.Grimaldi, V.Haasz, L.Michaeli, J.Saliga: "A two years experience from the International  Summer School on Data Acquisition Systems". Proc. of XVII IMEKO World Congress, June 22-27, 2003, Dubrovnik (Croatia), pp.75-78.

 

[176]    M.Borsic, D.Ilic, N.Milanovic, L.Ferkovic, P.Daponte, A.Cimitile, S.Rapuano, M.Marinov, A.Aiello, G.Mercurio, G.Truglia, V.Gasljevic, R.Vulpe, "Estimation of the uncertainty in measurement of the electrical energy-Italian-Croatian project". Proc. of XVII IMEKO World Congress, Dubrovnik (Croatia), June 22-27, 2003, pp.865-867.

 

[177]    P.Arpaia, F.Cennamo, P.Daponte, H.Schumny: "Modeling and characterization of Sigma-Delta analog-to-digital converters". IEEE Trans. on Instrumentation and Measurement, vol.52, No.3, June 2003, pp.978-983.

[178]  A. Cavuoto, L. De Vito, G. Truglia. "An instrument for residential gateway and network testing". atti del XVII IMEKO World Congress, Dubrovnik, Croazia, Giugno 2003, pp. 800-803.

 

[178]    P.Daponte, et al., IEEE Std 181, "IEEE standard on transitions, pulses, and related waveforms", 7 July 2003.

 

[179]    P.Daponte, G.Mercurio, S.Rapuano, G.Truglia: "An image processing-based method for stress classification in digital telecommunication networks". IEEE Trans. on Instrumentation and Measurement, vol.52, No.4, Aug. 2003, pp.1243-1250.

 

[180]    P.Daponte, L.Michaeli, S.Rapuano: "Real-time implementation of a method for ADC nonlinearity reduction". Proc. of 8th IMEKO TC-4 Wokshop on Modelling and Testing, Perugia, Sept., 2003, pp.281-284.

 

[181]    P. Arpaia,  P.Daponte, S.Rapuano: "A state of the art on ADC Modelling". Invited paper to 4th IEE ADDA-7th IMEKO TC-4 Wokshop on Modelling and Testing, Prague, Czech Rep., June, 2002, pp.151-156. Computer Standards and Interfaces, vol.26, 2003, pp.31-42.

 


Anno 2004

[182]    P.Daponte, L.Michaeli: "Introduction to Special Issue on ADC modelling and testing: 7th Workshop  on ADC Modelling and Testing". Measurement, Elsevier Pubs., vol.35, No.2, March 2004, pp.109-113.

 

[183]    V.Bernasconi, L.Bollea, A.Breda, P.Daponte, G.Maroncelli, S.Rapuano: "A TFR-based method for the quality assessment of UMTS signals: an application on the first Italian experimental network". IEEE Trans. on Instrum. and Meas., vol.53, No.2, April 2004, pp.485-492 .

 

[184]    P.Daponte, M.Di Penta, G.Mercurio: "TransientMeter: A distributed measurement system for power quality monitoring", IEEE Trans. on Power Delivery, vol.19, No.2, April 2004, pp.456-463.

 

[185]    E. Balestrieri, P. Daponte, S. Rapuano, "A state of the art on ADC error compensation methods", Proc. of IEEE IMTC 2004, Como, 18-20 May 2004, pp.711-716.

 

[186]    L. De Vito et al.: "Strumentazione per le misure sulle reti di telecomunicazione numeriche". Relazione ad invito del XXI Congresso Nazionale GMEE, Crema, Sett. 2004, pp. 273-282.

 

[187]    L. De Vito, L. Michaeli, S. Rapuano: "Non-linearity correction of ADCs in software radio systems". atti del IX IMEKO International Workshop on ADC Modeling and Testing (IWADC), Atene (Grecia), Sett. 2004, pp. 887-891.


Anno 2005

[188]    L. De Vito, S. Rapuano, G. Truglia: "A 3D baseband signal analyzer prototype for 3G mobile telecommunication systems". IEEE Transactions on Instrum. and Meas., Vol. 54, Issue 4, Agosto 2005, pp. 1444-1451.

 

[189]    L. De Vito et al.: "ADC parameters and characteristics". IEEE Instrumentation & Measurement Magazine, Vol. 8, Issue 5, Dic. 2005, pp. 44-54.

 

[190]    L. De Vito, P. Fiore, S. Rapuano: "Remote testing for residential gateways". Atti dell’IMEKO 15th Symposium, Gdynia (Polonia), Sett. 2005, pp.440-445.


Anno 2006

[191]     L. De Vito, S. Rapuano, G. Truglia: "An improved method for classification and metrological characterization of disturbances on QAM signals". IEEE Transactions on Instrum. and Meas., Vol. 55, Issue 1, Febbr. 2006, pp. 26-34.

 

[192]     L. De Vito et al.: "ADC testing - Part 7 in a series of tutorials in Instrumentation and Measurements". IEEE Instrumentation & Measurement Magazine, Vol. 9, Issue 2, Aprile 2006, pp. 37-47.


Anno 2007

[193]     L. De Vito, H. Lundin, S. Rapuano: "Bayesian Calibration of a Lookup Table for ADC Error Correction". IEEE Transactions on Instrum. and Meas., vol. 56, Issue 3, Giugno 2007, pp. 873-878.

 

[194]     D.Bao, L.DeVito, L.Tomaciello: "A method for classifying VoIP system impairments". Proc. of XV IMEKO Int. Symp., Iasi (Romania), Settembre 2007, pp.537-542.

 

[195]     D.Bao, L.DeVito, L.Tomaciello:"A Method for Testing the Protocol Stack of an Access Gateway to Broadband Network". Proc. of XV IMEKO Int. Symp., Iasi (Romania), Settembre 2007, pp.283-289.

 

[196]     D. Grimaldi, S. Rapuano, L. De Vito: "An automatic digital modulation classifier for measurement on telecommunication networks". IEEE Transactions on Instrum. and Meas., vol. 56, Issue 5, Ottobre 2007, pp. 1711-1720.


Anno 2008

[197]     L. De Vito, L. Michaeli, S. Rapuano: "An improved ADC-error-correction scheme based on a Bayesian approach". IEEE Transactions on Instrum. and Meas., vol. 57, Issue 1, Gennaio 2008, pp. 128-133.

[198]     L.De Vito, S.Rapuano, M.Villanacci: "An improved method for the automatic digital modulation classification". Proc. of IEEE I2MTC, Victoria, Vancouver Island, Canada, Maggio 2008, pp.1441-1446.

[199]     L. De Vito, S. Rapuano, M. Villanacci: "Real time spectrum analyzer including an automatic digital modulation classifier". Proc. of IEEE I2MTC, Victoria, Vancouver Island, Canada, Maggio 2008, pp. 1582-1587.

[200]     L.De Vito, S.Rapuano, L.Tomaciello: "An instrument for the detection of VoIP network impairments embedded in a VoIP gateway". Proc. of IEEE I2MTC/2008, Victoria, Vancouver Island, Canada, Maggio 2008, pp.503-508.

[201]     L. De Vito et al. "Draft Standard for terminology and test methods for Digital-to Analog Converters". IEEE Std. 1658

[202]     L. Tomaciello, L. De Vito, S. Rapuano: "One-way delay measurement: state of the art". IEEE Transacrions on Instrum. and Meas., vol. 57, n. 12, December 2008, pp. 2742 – 2750.

[203]     D. Bao, L. De Vito, S. Rapuano, L. Tomaciello: "Compliance and Interoperability Testing of SIP Devices". chapter 8 of SIP Handbook: Services, Technologies, and Security, CRC Press, Dicembre 2008, pp. 173-199.

[204]      D. Bao, L. De Vito, S. Rapuano: "Selecting test signals for successful impairment classification in VoIP systems". Proc. of 16th IMEKO TC-4 Int. Symp., Florence, Italy, Settembre 2008, pp. 961-966.

[205]      L. De Vito, S. Rapuano, M. Villanacci: "An automatic DSP-based classifier for impairments on QAM modulations". Proc. of 16th IMEKO TC-4 Int. Symp., Florence, Italy, Settembre 2008, pp. 967-972.


Anno 2009

[206]     L. De Vito, S. Rapuano: "Validating a method for classifying digitally modulated signals". Measurement, April 2009, vol. 42, N. 3, April 2009, pp. 427-435.

[207]     L. De Vito, S. Rapuano, D. Slepicka: "ADC Standard Harmonization: Comparison of test methods – Phase II". Proc. of I2MTC, 2009, Singapore, pp.1111-1116.

[208]     L. De Vito et al.: "Session initiation protocol automatic debugger". IEEE Transactions on Instrum. and Meas., vol. 58, N. 6, June 2009, pp.1869-1877.

[209]     N. Björsell, P. Daponte, L. De Vito, S. Rapuano: "Automatic signal recognition for a flexible spectrum management". Proc. of XIX IMEKO World Congress, Lisbon, Portugal, September 6-11, 2009, pp. 568-573.

[210]     L. De Vito, D. D. Napolitano, S. Rapuano, M. Villanacci: "Interference sensitivity of an automatic modulation classifier". Proc. of XIX IMEKO World Congress, Lisbon, Portugal, September 6-11, 2009, pp.562-567.

[211]     D. Bao, L. De Vito, D. D. Napolitano, L. Tomaciello: "DSL interoperability testing laboratory". Proc. of XIX IMEKO World Congress, Lisbon, Portugal, September 6-11, 2009.


Anno 2010

[212]    L. De Vito, S. Rapuano: "Assessing interoperability of access equipment for broadband networks". Measurement, vol. 43, N. 3, April 2010, pp. 320-328.

[213]    L. De Vito, S. Rapuano, M. Villanacci: "Prototype of an Automatic Digital Modulation Classifier Embedded in a Real-Time Spectrum Analyzer". IEEE Transactions on Instrum. And Meas., vol. 59, N. 10, Oct. 2010, pp. 2639 – 2651.

[214]    P. Daponte, L. De Vito, C. M. De Dominicis, P. Ferrari, A. Flammini, S. Rapuano: "Characterization of the A/D conversion section in Software Defined Radios". Proc. of IEEE Int. Instrum. and Meas. Tech. Conf., Austin, May 2010, pp.

[215]    L. De Vito, D. D. Napolitano, S. Rapuano, M. Villanacci: "Eigenvalue-based signal detector for an automatic modulation classifier". Proc. of IEEE Int. Instrum. and Meas. Tech. Conf., Austin, May 2010, pp. 1131-1136.

[216]    K.N.Poudyal, P.Daponte, L.De Vito, B.K.Bhattarai, B.Sapkota: "Study of Variation of Global Solar Radiation at Different Altitudes at Himalaya Region - A Case Study in Nepal". Proc. of XVII IMEKO TC-4 Int. Symposium, Kosice, Sept. 2010, pp.

[217]    L.De Vito, D.D.Napolitano, S.Rapuano, M.Villanacci, D.L.Carnì: "A portable automatic digital modulation scanner". Proc. of XVII IMEKO TC-4 Int. Symposium, Kosice, Sept. 2010, pp.

Ultimo aggiornamento Martedì 10 Luglio 2012 00:08  

Eventi

Agosto 2017
L M M G V S D
31 1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 31 1 2 3

Ultimi Eventi

Nessun evento

Notizie flash

Luca De Vito, ricercatore del Dipartimento di Ingegneria dell’Università del Sannio, riceve dalla IEEE un premio di $ 10000 per la proposta di un corso di misure sui droni.


A Torino, durante la 2017 International Instrumentation and Measurement Technology Conference, Luca De Vito, ricercatore del Dipartimento di Ingegneria dell’Università degli Studi del Sannio ha ricevuto il Faculty Course Development Award (http://ieee-ims.org/awards/faculty-course-development-award) della IEEE Instrumentation and Measurement Society.

L’IEEE, acronimo di Institute of Electrical and Electronic Engineers (www.ieee.org), è la più grande associazione professionale al mondo nel campo dell’ingegneria elettrica ed elettronica.

All’interno della IEEE, la Instrumentation and Measurement Society (IMS) (www.ims.ieee.org) è dedicata allo sviluppo e all’utilizzo di strumenti elettrici ed elettronici per misurare, monitorare e registrare fenomeni fisici.

Il Faculty Course Development Award della IEEE IMS, che consiste in un contributo di $ 10000, è stato stabilito per supportare ed incoraggiare docenti a sviluppare nuovi corsi o a migliorare significativamente un corso esistente che sia dedicato alla strumentazione e/o alle misure.

La proposta premiata descrive i contenuti di un corso dal titolo “Drone for measurement and measurement for drone”, incentrato sulle tecnologie di misura legate all’utilizzo dei droni e dedicato agli studenti del dottorato in Tecnologie dell’Informazione per l’Ingegneria.

 

Luca De Vito, ricercatore del Dipartimento di Ingegneria dell’Università del Sannio, riceve dalla IEEE un premio di $ 10000 per la proposta di un corso di misure sui droni.
Joomla Appliance - Powered by TurnKey Linux